7-11
1
2
3
Checking the clutch switch
– Disconnect the clutch switch connector from the cable tree.
– Connect an ohmmeter to the bipolar connector AT2
Adventure) or AT1
(990 Adventure) or AT1
1
or AT3
(950 Supermoto) of the clutch switch and slowly pull the
3
clutch lever.
– The switch should close around 2/3 of the lever travel.
Reading: max. 1
Ω
Reading: ∞
when the clutch lever is not pulled
(990 Super Duke)
2
Ω
when the clutch lever is pulled
(950
1