Vehicle Speedometer Sensor Inspection; Manual Transaxle Removal/Installation - Mazda 2002 6 Workshop Manual

VEHICLE SPEEDOMETER SENSOR INSPECTION

Without ABS
1. Remove the vehicle speedometer sensor.
2. Measure voltage (AC range) between terminals of
the vehicle speedometer sensor while the gear is
turning.
Meter needle
Moves slightly under Repair wiring harness between
5 V (AC range) instrument cluster and vehicle
speedometer sensor.
Does not move Replace vehicle speedometer
sensor.
3. Install the vehicle speedometer sensor.
End Of Sie

MANUAL TRANSAXLE REMOVAL/INSTALLATION

1. Remove the battery, battery tray and battery bracket.
2. Remove the air cleaner compornent. (See
3. Remove the wheels, tires and splash shields.
4. Remove the under cover.
5. Remove the steering gear and power steering pipe. (See
INSTALLATION.)
6. Remove the front auto leveling sensor. (See
INSTALLATION.)
7. Drain the transaxle oil into a suitable container.
8. Remove in the order indicated in the table.
9. Install in the reverse order of removal.
10. Adjust the headlight zeroset. (See
11. Add the specified amount of specified transaxle oil.
12. Install the air cleaner compornent. (See
13. Warm up the engine and transaxle, inspect for oil leakage, and inspect the transaxle operation.
MANUAL TRANSAXLE
Action
F–10 INTAKE-AIR SYSTEM
T–32 FRONT AUTO LEVELING SENSOR REMOVAL/
T–31 HEADLIGHT ZEROSET.)
F–10 INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
N–10 STEERING GEAR AND LINKAGE REMOVAL/
REMOVAL/INSTALLATION.)
A6E511217400W02
W6U515WA4
J
A6E511201029W01
J–5