POWER STEERING OIL PUMP REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
1
Drive belt
2
Pressure switch connector
3
Pressure pipe
End Of Sie
POWER STEERING OIL PUMP DISASSEMBLY/ASSEMBLY
Note
• The following procedure is for replacement of the O-ring and oil seal only. Replace the pump component if
other repairs are necessary.
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
N–22
ENGINE SPEED SENSING POWER STEERING
.
4
Suction hose
5
Power steering oil pump
A6E661432650W01
A6E0612W092
A6E661432650W02