Manual Transaxle; Transaxle Oil Inspection; Transaxle Oil Replacement - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Workshop manual (1187 pages)

Bodyshop manual (116 pages)

Table of Contents

1. Park the vehicle on level ground.

2. Remove the oil level plug and washer.

3. Verify that the oil is near the brim of the plug port.

• If the oil level is lower than the low level, add

the specified amount and type of oil through

the oil level plug hole.

Specified oil grade

API Service GL-4 or GL-5

Specified oil viscosity

All-season: SAE 75W-90

Above 10 °C {50 °F}: SAE 80W-90

4. Install a new washer and the oil level plug.

Tightening torque

40—58 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}

1. Remove the drain plug with the washer.

2. Drain the oil into a suitable container.

3. Install a new washer and the drain plug.

Tightening torque

40—58 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}

4. Remove the oil level plug with washer and add

the specified amount and type of oil through the

oil level plug hole until the level reaches the

bottom of the oil level plug hole.

Specified oil viscosity

All-season: SAE 75W-90

Above 10 °C {50 °F}: SAE 80W-90

Capacity (approximate quantity)

2.87 L {3.03 US qt, 2.53 lmp qt}

5. Install a new washer and the oil level plug.

Tightening torque

40—58 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}