Listening To The Radio; Am Frequency Step Setup (On Some Models) - Integra DTR 5.9 Instruction Manual

Listening to the Radio

AM Frequency Step Setup
(on some models)
2, 3
1, 5
For AM tuning to work properly, you must specify the
AM frequency step used in your area. Note that when
this setting is changed, all radio presets are deleted.
1
2
52
Downloaded from www.Manualslib.com
1
2–4
Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
Use the Up and Down [
buttons to select "7. Hardware-
Setup," and then press [Enter].
manuals search engine
3
4
5
Note:
• This procedure can also be performed on the AV
receiver by using its [Setup], [Enter], and arrow but-
tons.
]/[ ]
Use the Up and Down [
buttons to select "7-3. Tuner,"
and then press [Enter].
Use the Left and Right [
buttons to select:
7–3. Tuner
AM Freqency Setup 9kHz
10kHz: Select if 10kHz steps are used
in your area.
9kHz: Select if 9kHz steps are used
in your area.
Press the [Setup] button.
Setup closes.
]/[ ]
]/[ ]