Backup & Viewing - Q-See QSTD2404 User Manual

QSTD2400 Series DVR User's Manual
3.5 Backup & Viewing
This unit supports backup to built-in SATA DVD Writer (optional
equipment), or to USB Flash drive, through the USB port on the front panel.
Users can also make backup by IE browser via internet, refer to 6.3.2
Remote Backup.
Taking USB flash backup as an example, Press right mouse button to
show the control bar, refer to Fig 4.1 Control Bar.
At DVR location:
STEP1 Enter Backup mode, see Fig 3.18 Backup Setup
STEP2 Choose the channel, and set the start and end time. Click Date
button to change the date.
STEP3 Enable "Attach record player," it will save a special player along
with the backup to play it. With this player, users can make time searches
and event searches when checking the backup.
STEP4
Click OK button. A window will appear as shown in Fig 3.19
Backup Information.
Notice: If users install built-in DVD writer and USB device, it will show USB device first
by default. It will show CD-ROM even though users install DVD writer
STEP5 Press OK button. It will begin to write video from HDD inside DVR
to backup device, and show the process as shown below.
Fig 3.18 Backup Setup
Fig 3.19 Backup Information
21