Q-See QSTD2404 User Manual page 59

QSTD2400 Series DVR User's Manual
STEP5 PCam will be opened after it is installed.
STEP6 Input the server's address, ID, and password respectively in the
columns of "Server", "User" and "Password", and click "Go" to login to the DVR.
It will show the picture if accessed successfully.
STEP7 Camera 1 is the default display after login. Change the camera in drop
down menu of "Channel".
Notice: User name and password here are the same with that used on the DVR. The
defaults are admin and 123456.
55