Q-See QSTD2404 User Manual page 11

QSTD2400 Series DVR User's Manual
The Rear Panel Layout for 4 Channel DVR is shown as Fig 2.4 Rear 4Ch.
Fig 2.6 Rear Panel for 4-channel DVR
Name
1 Video in
2 Video out
3 S-video
4 Audio out
5 Audio in
6 PS/2 Port
8 USB MOUSE
9 RJ45 Port
10 VGA Port
11 COM Port
12 ALARM IN/OUT
13 Power
14 Loop out
15 e-SATA Port
Tab 2.4 4 Channel Rear Panel Layout
Notice: The resolution of VGA output is 800*600/60Hz. If connected through VGA port,
please assure your display supports the display mode. (For most of LCD screens, they can
adapt to it automatically without manual adjustment)
Description
Video input channels from 1-16
Connect to monitor
S-Video output, connect to monitor
Audio output, connect to the Speaker
Audio input
Connection for PS/2 mouse
Connection for USB mouse
Connect to router for network/internet access
VGA output, connect to monitor
For debugging or serial input
External sensor input 1-4 Relay output 1-4. Connect to
external alarm. Please refer to 2.3.2 Installing Sensor
Alarm
Power on/off
For outputting each channel's image independently
Connect to eSATA HDD for backup
7