Chapter 3 Basic Operating Instructions; Power On/Off; Starting - Q-See QSTD2404 User Manual

Hide thumbs Also See for QSTD2404:

Table of Contents

QSTD2400 Series DVR User's Manual

Basic Operating

CHAPTER 3

Instructions

Notice: Before you power on the unit, please make sure all the connections are good.

There are two ways to start the DVR. One way is to connect the power

source, switch on the power button near the power port on the rear panel,

and the system will start up. The other is to start by the Power button on the

front panel, (this method can only be used if the system is not turned off),

please press Power button 3 t o 5 seconds, the system will start normally, and

the screen will display Fig 3.1 System Loading.

Fig 3.1 System Loading

Following that, it will enter in live view with eight screens as shown below:

Fig 3.2 Preview

Table of Contents

Qstd2416 Qstd2408