Schedule Set; Usb Backup - Q-See QSD2216C16-250 User Manual

5.7 SCHEDULE SETUP
Move the cursor moves to Schedule Set and press the Enter button. The schedule setup
window will appear listing the days of the week. Select a day and press the Enter button and
the below window will be displayed.
You can setup a recording schedule for each day by using this setup window. Please note:
Military time must be used. You can setup 7 time periods for each day.
START: start record time
STOP: stop record time
SCHEDULE ENABLE: must set to "on", if want to enable schedule record function
Notice: Manual record mode and schedule record mode (including motion detection
record mode, sensor record mode and time schedule record mode) can not be used at
the same time. Once the user selects Schedule record mode, manual record mode will
disabled; once user select manual record mode, schedule record mode will be
disabled.

5.8 USB BACKUP

Set the USB BACKUP.
The port on the DVR is designed to work with USB flash drives. Plug in the flash drive and press
the "ENTER" button, you will see the menu below:
29