NETGEAR GS700TP Software Administration Manual page 89

GS700TP Smart Switch Software Administration Manual
• Port ID SubType – Displays the port ID subtype. For example, IPv4 address.
• Port ID – Displays the port identification of the port transmitting the LLDP frame.
• Port Description – Displays information about the port, including manufacturer, product
name and hardware/software version.
• System Name – Displays the administratively assigned device name.
• System Description – Describes the device. For example, system hardware type and
version, operating system and network software.
• System Capabilities – Describes the primary device function. For example: Bridge,
Router.
Managed Address
• Address SubType – Displays the managed address subtype. For example, MAC or IPv4.
• Address – Displays the managed address.
• Interface SubType – Displays the port subtype.
• Interface Number – Displays the port number.
MAC/PHY Details
• Auto-Negotiation Supported – Displays the port speed auto-negotiation support status.
The possible values are:
– True – Indicates Auto-negotiation is supported on the port.
– False – Indicates Auto-negotiation is not supported on the port.
• Auto-Negotiation Enabled – Displays the port speed auto-negotiation active status. The
possible values are:
– True – Indicates Auto-negotiation is enabled on the port.
– False – Indicates Auto-negotiation is not enabled on the port.
• Auto-Negotiation Advertised Capabilities – Displays the port speed auto-negotiation
capabilities. For example, 1000BASE-T half duplex mode, 100BASE-TX full duplex
mode.
• Operational MAU Type – Displays the Medium Attachment Unit (MAU) type. The
MAU performs physical layer functions, including digital data conversion from the
Ethernet interfaces' collision detection and bit injection into the network. For example,
100BASE-TX full duplex mode.
802.3 Power via MDI
3-55
v1.0, November 2009
Managing System Settings