NETGEAR GS700TP Software Administration Manual page 168

GS700TP Smart Switch Software Administration Manual
• Restore Defaults – Restore the DSCP Mapping device factory default values. The
possible field values are:
– Checked – Restores the factory default settings for DSCP mapping values.
– Unchecked – Maintains the current DSCP mapping settings.
2. Select the Queue values for each DSCP In value in the provided fields.
3. Check or uncheck the Restore Defaults box in the provided field.
4. Click APPLY to update the device.
Creating Class Mapping
One IP ACL and/or one MAC ACL comprise a class map. Class maps are configured to match
packet criteria, and are matched to packets on a first-fit basis. For example, Class Map A is
assigned packets based only on an IP based ACL or a MAC-based ACL. Class Map B is assigned
to packets based on both an IP-based and a MAC based ACL.
To define class maps:
1. Click QoS > CoS > Advanced > Class Mapping. The Class Mapping screen displays:
Figure 5-7
Configuring QoS
v1.0, November 2009
5-11