NETGEAR GS700TP Software Administration Manual page 85

GS700TP Smart Switch Software Administration Manual
• Port Description – Displays information about the port, including manufacturer, product
name and hardware/software version.
• Advertisement – Displays the advertisement status of the port. The possible field values
are:
– Enable – Enables advertisement on the port.
– Disable – Disables advertisement on the port.
2. Click REFRESH to refresh the Local Information screen.
To view LLDP-MED detailed port information:
1. Click System > LLDP > Advanced > Local Information. The LLDP-MED Local
Information screen displays.
2. Click the Interface to view its detailed information. The Port Information window opens:
The Port Information window contains the following fields:
Managed Address
• Address SubType – Displays the managed address subtype. For example, IPv4.
• Address – Displays the managed address.
• Interface SubType – Displays the port subtype.
• Interface Number – Displays the port number.
MAC/PHY Details
• Auto-Negotiation Supported – Displays the port speed auto-negotiation support status.
The possible values are:
– True – Indicates auto-negotiation is supported on the port.
– False – Indicates auto-negotiation is not supported on the port.
• Auto-Negotiation Enabled – Displays the port speed auto-negotiation active status. The
possible values are:
– True – Indicates auto-negotiation is enabled on the port.
– False – Indicates auto-negotiation is not enabled on the port.
• Auto-Negotiation Advertised Capabilities – Displays the port speed auto-negotiation
capabilities. For example, 1000BASE-T half duplex mode, 100BASE-TX full duplex
mode.
3-51
v1.0, November 2009
Managing System Settings