NETGEAR GS700TP Software Administration Manual page 178

GS700TP Smart Switch Software Administration Manual
Figure 6-3
The RADIUS Accounting Server Configuration screen contains the following fields:
• Accounting Mode – Select the RADIUS accounting method. The possible field values
are:
– None – Indicates RADIUS accounting is disabled. This is the default.
– 802.1x – Indicates 802.1x authentication sessions are recorded.
– Login – Indicates device management (Web login and logout) sessions are recorded.
– Both – Indicates both 802.1x authentication and device management sessions are
recorded.
• Accounting Server Address – Select the RADIUS Accounting Server IP address.
• Accounting Port – Enter the RADIUS Accounting port number. The accounting port is
used to handle RADIUS server accounting. The field default is 1813.
2. Select the RADIUS Accounting Mode from the list in the provided field.
3. Select the RADIUS Accounting Server Address from the list in the provided field.
4. Enter the RADIUS Accounting Port in the provided field.
Managing Security
v1.0, November 2009
6-6