NETGEAR GS700TP Software Administration Manual page 187

GS700TP Smart Switch Software Administration Manual
Figure 6-8
The Port Authentication screen contains the following fields:
• Interface – Displays the interfaces.
• User Name – Displays the supplicant (client) user name, once the user is authenticated.
• Port Control – Select the port authorization state.
– Auto – Indicates the port control is set to Auto and a single client has been
authenticated via the port.
– Authorized – Indicates the port control is Forced Authorized, and clients have full port
access.
– Unauthorized – Indicates either the port control is force Unauthorized, or the port
control is Auto but a client has not been authenticated via the port.
• Guest VLAN – Select whether the Guest VLAN is enabled or disabled on the port. The
default VLAN cannot be defined as a Guest VLAN. The possible field values are:
– Enable – Enables using a Guest VLAN for the unauthorized port. If a Guest VLAN is
enabled, the unauthorized port automatically joins the VLAN selected in the VLAN
List field.
6-15
v1.0, November 2009
Managing Security