GS700TP Smart Switch Software Administration Manual
are forwarding packets and Multicast traffic. A port requesting to join a specific Multicast group
issues an IGMP report specifying that Multicast group. This results in the creation of the Multicast
filtering database.
To configure Basic IGMP Snooping:
1. Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP
Snooping Configuration screen displays:
Figure 4-27
The Basic IGMP Snooping Configuration screen contains the following fields:
IGMP Snooping Configuration
•
IGMP Snooping Status – Select the IGMP Snooping status on the device. The possible
field values are:
–
Disable – Disables IGMP Snooping on the device. This is the default value.
–
Enable – Enables IGMP Snooping on the device.
Interface Settings
•
VLAN ID – Displays the VLAN ID.
•
Status – Select the IGMP Snooping status on the VLAN. The possible field values are:
4-49
v1.0, November 2009
Configuring Switching Settings