NETGEAR GS700TP Software Administration Manual page 41

GS700TP Smart Switch Software Administration Manual
4. Select the Time Zone Offset from the list.
5. Click APPLY to update the system settings.
Note: If you selected SNTP, you must configure the SNTP servers. See
Configuration"
SNTP Server Configuration
The SNTP Server Configuration screen allows network administrators to define primary and
secondary SNTP servers. The system time is initially retrieved through the primary SNTP server.
If the device is unable to retrieve the system time through the primary server, the device retrieves
the system time from the secondary server.
To configure SNTP servers:
1. Click System > Management > Time > SNTP Server Configuration. The SNTP Server
Configuration screen displays:
Figure 3-4
The SNTP Server Configuration screen contains the following fields:
• SNTP Server 1 – Enter the primary SNTP server IP address. The Primary SNTP server is
the first server used to retrieve the system time.
3-7
for detailed instructions on configuring the SNTP servers.
v1.0, November 2009
"SNTP Server
Managing System Settings