Removal Of Bushes - Husqvarna TE 250 Workshop Manual

SMR 450-R
Remove the vent hose (8) and the steering pin nut (9). Extract the entire assem-
bly "b: steering head-handlebar-controls" and place it having attention to
keep the brake fluid tank ALWAYS in plane, then withdraw the fork legs.
Loosen the steering pin ring nut (10), remove it and extract the steering base
assy with pin from the steering head tube. Remove the dust cover (11).

Removal of Bushes

Remove the two conical roller bearings and the two bushes fastening screws
(1), recover the intermediate spacers (2) then extract the bushes (c) from the
steering head tube using an aluminium drift (c).
Part. N. 8000 B0148 (02-2008) R.7