Husqvarna TE 250 Workshop Manual page 329

• Rear frame cable runway.
Place the rear cables as shown in the picture. The fuses/fall sensor cable branch
runs between the remote control switch and the rear frame. The tail light cables
runs between the rear frame and the remote control switch.
• Connecting the remote control switch and the turn indicators flash device.
Place the flash device cable between the rear frame and the remote control
switch. Connect the flash device and remote control switch connectors as shown.
• Fastening the fuses/fall sensor cable.
Fasten the fuses/fall sensor cable to the clip as shown in the picture.
• Connecting the fall sensor.
Connect the fall sensor connector as shown in the picture.
Part. N. 8000 B0148 (02-2008)
ELECTRIC SYSTEM, DIGITAL INSTRUMENT
M.49
Tail light cable
Fuses/fall
sensor
cable branch
Flash device cable
Flash device
connector
Remote control
switch connect.
Fuses/fall sensor
cable
Fall sensor connector