Reassembly Of Flywheel - Husqvarna TE 250 Workshop Manual

Hide thumbs Also See for TE 250:

Table of Contents

ENGINE REASSEMBLY

Reassembly of flywheel

Clean the flywheel rotor removing any debris gathered in centrifugated oil and

attracted to the magnets. Reassembly the Woodruff key and the rotor on the

crankshaft. Holding the rotor (on the R.H. side place an aluminium shim between

the teeth of the primary drive gears, in order to prevent its rotation), mount the nut

and tighten it to 75 Nm-7,65 Kgm- 55.3 ft/lb. Mount the two centering bushes.

Part. N. 8000 B0148 (02-2008)

Show Quick Links

Table of Contents