Husqvarna TE 250 Workshop Manual page 328

Injector
connector
Central unit
connection
Water
temp.
Cable runway
stop light
ELECTRIC SYSTEM, DIGITAL INSTRUMENT
• Connecting the injector.
Connect the injector connector.
• Connecting the central unit.
Connect the central unit connector.
• Connecting the 'MAQS' and the water temperature sensor.
Connect the 'MAQS' and water temperature connectors as shown in the picture.
The picture also shows the cable tray of these connections.
Cable
runway
• Connection and cable runway of the rear stoplight.
Connect the rear stoplight connector as shown in the picture. The picture also
Stop light
shows the rear stoplight cable runway.
sensor
M.48 Part. N. 8000 B0148 (02-2008)