Configuring Wpa With Radius - NETGEAR WN802T Reference Manual

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Note: If you use a wireless computer to configure WEP settings, you will be
disconnected when you click Apply. Reconfigure your wireless adapter to match
the new settings or access the wireless access point from a wired computer to
make any further changes.

Configuring WPA with RADIUS

Not all wireless adapters support WPA. Furthermore, client software is required on the client.
Vista, Windows XP and Windows 2000 with Service Pack 3 or later do include the client software
that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support
WPA. Consult the product document for your wireless adapter and WPA client software for
instructions on configuring WPA settings.
To configure WPA, follow these steps:
1. Under the Configuration tab, select Security on the main menu, select Advanced from the
side menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen
displays.
2. Enter the RADIUS server settings as shown in
page 4-13.
3. Click Apply to save your RADIUS server settings.
3-8
"Configuring the RADIUS Server Settings" on
v1.0, September 2008
Wireless Security Settings