NETGEAR WN802T Reference Manual page 58

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
To reboot the wireless access point from the user interface:
1. From the main menu of the browser interface, select Maintenance > Reset and then Reboot
AP on the side menu. The Reboot AP screen displays as follows:.
Figure 4-5 Reboot the AP
2. Select the Yes radio button next to the Reboot option, and then click Apply.
Warning: Do not try to go online, turn off the Access Point, shut down the
To erase the current settings and reset the wireless access point to the original factory default
settings:
1. In Step 1 of the previous section, select Restore Defaults from the side menu (see
5).
2. Select the Yes radio button next to the Restore to factory default settings option.
3. Click Apply.
4-6
computer or do anything else to the Access Point until it finishes
rebooting. When the power light turns green, wait a few more
seconds before doing anything with the Access Point.
v1.0, September 2008
Figure 4-
Management