Configuring Wpa-Psk - NETGEAR WN802T Reference Manual

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
4. Under the Configuration tab, select Security from the main menu, and then select Security
Settings from the side menu. From the Network Authentication drop-down menu, select
WPA & WPA2 with RADIUS from the list. By default, Data Encryption will be set to
TKIP+AES.
5. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations).
6. Click Apply to save your settings.

Configuring WPA-PSK

Not all wireless adapters support WPA. Furthermore, client software is required on the client.
Vista, Windows XP and Windows 2000 with Service Pack 3 or later include the client software
that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support
WPA. Consult the product document for your wireless adapter and WPA client software for
instructions on configuring WPA settings.
Figure 3-6 WPA-PSK security settings
3-12
v1.0, September 2008
Wireless Security Settings