NETGEAR WN802T Reference Manual page 43

4. Under the Configuration tab, select Security from the main menu, and then select Security
Settings from the side menu.
Figure 3-3 WPA with RADIUS security settings
5. Select WPA with RADIUS from the Network Authentication drop-down menu. Data
encryption will be set to TKIP by default (see
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations).
7. Click Apply to save your settings.
Wireless Security Settings
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Figure
v1.0, September 2008
3-3).
3-9