Default Settings And Technical Specifications; Factory Default Settings - NETGEAR WN802T Reference Manual

Default Settings and Technical Specifications

This appendix provides the factory default settings and technical specifications for the NETGEAR
Wireless-N Access Point WN802T v2.

Factory Default Settings

You can use the Reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
• To perform a hard reset, push and hold the Reset button for approximately 5 seconds (until the
Power LED changes from blinking green to solid amber). Your device will return to the
factory configuration settings shown in
• Pressing the Reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Access Point Default Configuration Settings
Feature
AP Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Ethernet Connection
Ethernet MAC Address
Access Point Mode
Port Speed
Local Network (LAN)
Lan IP
Subnet Mask
Gateway Address
Default Settings and Technical Specifications
Table A-1.
Description
192.168.0.233
admin
password
See rear label.
On
10/100/1000 Mbps
192.168.0.233
255.255.255.0
192.168.0.1
v1.0, September 2008
Appendix A
A-1