Clock/Probe Setting Time Of Day; Min/Sec Timer; Cook Time - Viking vdsc530t Service Manual

30" electronic control dual fuel range
Hide thumbs Also See for vdsc530t:
Table of Contents

Advertisement

Operation
Settings and Functions
Clock/Probe
Setting Time of Day
(Clock defaults to
"12:00" and flashes
when first powered up or
if power is interrupted.)
1. Press "CLOCK/PROBE" button. The clock
display will flash.
2. Toggle "SELECTOR KNOB" right to increase
or left to decrease to set desired time. Time
will scroll in 1 minute increments per individual
toggle. If "SELECTOR KNOB" is held in either
right or left position, time will increase or
decrease in 10 minute increments until desired
time is reached. Clock automatically rolls from
AM to PM.
3. Push in "SELECTOR KNOB" to accept time and
start timer or after five seconds, time will auto-
accept.
When clock is set and needs to be changed, press
"CLOCK/PROBE" button and follow the two steps
above. Clock display will flash when activated.

Min/Sec Timer

(Used to operate timer
independently from
oven.)
1. Press "MIN/SEC
TIMER" button.
(0:00 will flash in display
along with HR and MIN).
Hours are to the left of
the colon and minutes are
to the right of the colon.
TIMER will illuminate under
display.
2. Toggle "SELECTOR KNOB" right to increase
or left to decrease to set the desired time.
Time will scroll in one minute increments per
individual toggle. If "SELECTOR KNOB" is held
in either right or left position, time will increase
or decrease in 10 minute increments until
desired time is reached.
3. Push in "SELECTOR KNOB" to accept time or
after five second, stop time will auto-accept.
© 2010 Viking Preferred Service
CLOCK/
OVEN
PROBE
FUNC
MIN/SEC
OVEN
TIMER
TEMP
COOK
OFF
TIME
STOP
CLEAR/
SETTINGS
TIME
CLOCK/
OVEN
PROBE
FUNC
MIN/SEC
OVEN
TIMER
TEMP
COOK
OFF
TIME
STOP
CLEAR/
SETTINGS
TIME
Clock Display
SET
HR
MIN
00:00
AM
PM
STOP
TIMER
NO PROBE
COOK TIME ON DELAY
Time will count down on display from programmed
time. There will be an audible beep at one minute
and three beeps when time expires (0:00).

Cook Time

(Start cooking now.)
The total cooking
duration can be set
to automatically shut
the oven off at the
desired time.
1. Press "COOK TIME" button. (0:00 will flash in
display along with HR
and MIN). Hours are to
the left of the colon and
minutes are to the right
of the colon. COOK TIME
will illuminate under
display.
2. Toggle "SELECTOR KNOB" right to increase or
left to decrease to set desired time. Time will
scroll in one minute increments per individual
toggle. If "SELECTOR KNOB" is held in either
right or left position, time will increase or
decrease in 10 minute increments until desired
time is reached.
3. Push in "SELECTOR KNOB" to accept time or
after five seconds, time will auto-accept.
4. Set OVEN FUNCTION and OVEN
TEMPERATURE as detailed in "Set Oven
Function and Temperature" on
pages 16-17.
Timer will activate and count down once OVEN
FUNCTION and OVEN TEMPERATURE have been
activated. There will be an audible beep at one
minute and three long beeps when time expires
(0:00). Pressing the "COOK TIME" button, then
the "CLEAR/SETTINGS" button will deactivate
the timer during any cook program. The oven
will continue to function normally. Depressing the
"OFF" button during a timed cook cycle will shut
timer and oven off.
Note: Cook timer does not count down during
PREHEAT mode.
CLOCK/
OVEN
PROBE
FUNC
MIN/SEC
OVEN
TIMER
TEMP
COOK
OFF
TIME
STOP
CLEAR/
TIME
SETTINGS
Clock Display
SET
HR
MIN
AM
PM
STOP TIMER NO PROBE
COOK TIME
ON DELAY
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents