Operation; Settings And Functions; Left Display Window; Clock, Time Function And Temp Probe Display - Viking vdsc530t Service Manual

Operation

Settings and Functions

Control Operation
The following is the basic layout of the buttons, displays and how they are referenced below.
Time and Probe Functions
The main Controller governs all oven operations as
well as timing and meat probe functions.
There are two digital displays, one on each side of
the control knob and function buttons.

Left Display Window

The left display windows
indicates the following:
countdown

Clock, Time Function and Temp Probe Display

When AC power is applied (including after a power
loss), the CLOCK display defaults to a flashing
"12:00" and the word SET is displayed above the
flashing display and begins the incremental time.
Set the time as shown on page 14. When in any
TIME programming mode, if a display indictor is
flashing, pressing the "CLEAR/ SETTINGS" button
will cancel the program and revert the display to
the default setting (TIME OF DAY). Once a program
has started, the CLEAR function is deactivated and
the "OFF" button must be depressed to cancel a
timed program.
Once set, the current time will be displayed.
Depressing the "OFF" button will extinguish
the display. Though the display is OFF, the clock
function is operating.
© 2010 Viking Preferred Service
Control /Selector Knob
Left Display 8 Program Buttons
(Oven and Time Functions)
Right Display
(Oven and Temperature Functions)

Display Time of Day

If the display is off, depressing the "OVEN FUNC",
"OVEN TEMP", "OFF" or "CLEAR/SETTINGS"
buttons will activate the display and show the current
time of day. Depressing the "CLOCK/PROBE" button
will activate the display and allow adjustments to the
current time of day.
Depressing the "MIN/SEC TIMER", "COOK
TIME", and "STOP TIME" buttons will activate the
display and allow time function programming. If
you depress the "OFF" button once while in any
of these modes, the TIME OF DAY will display.
Depressing a second time will extinguish the display.

Right Display Window

The right display window
indicates the following:

Temperature And Oven Function

Temperature settings range from 150°F (55.5°C) –
550°F (287.8°C). Each increase/decrease is in 5ºF
(2ºC) increments.

Temperature Display

Actual Temp (PREHEAT only): 1ºF (1ºC) increments
Meat Probe Actual Temp: 1ºF (1ºC) increments
Set Temp (all other cycles): 5ºF (2ºC) increments
Note: PREHEAT and Meat Probe are the only cycles
where actual temperature is displayed. Otherwise
display shows only set temperature.
13