Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Understanding AutoCell Configuration Options
Figure 5-3: Advanced Wireless Settings screen AutoCell Setup options
There are three AutoCell configuration setting choices:
•
Enable/disable Auto RF Management: Enabled by default
•
Enable/disable Enhanced RF Security: Disabled by default
•
Enable/disable Rogue Device Detection: Disabled by default
These options are discussed below.
Auto RF Management
Note: Channel selection and power management is automatically adjusted by the
AutoCell Auto RF Management option. The Auto RF Management option is enabled by
default.
5-4
November 2005
Advanced Configuration