Power Connector Cable - HP Stream 11 Pro G2 Maintenance And Service Manual

Power connector cable

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
Remove the power connector cable:
1. Disconnect the power connector cable (1) from the system board.
2. Remove the Phillips PM2.0×3.3 screw (2) that secures the power connector to the bottom cover.
3. Remove the power connector cable (3).
Reverse this procedure to install the power connector cable.
Keyboard/top cover on page
Spare part number
743480-002
30).
Component replacement procedures 45