Rtc Battery - HP Stream 11 Pro G2 Maintenance And Service Manual

4. Remove the speakers (4).
Reverse this procedure to install the speakers.

RTC battery

Description
RTC battery (includes cable and double-sided adhesive)
Before removing the RTC battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
Remove the RTC battery:
1. Disconnect the RTC battery cable (1) from the system board.
38 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Spare part number
830764-001
30).