Whirlpool LCE4332PQ User Manual page 40

13. Remove the clip from the groove in the
gearshaft.
Clip
Gearshaft
14. Pull the motor support off the gearshaft.
Motor
Support
15. Remove the motor shield from the frame.
16. Pull the brake band support assembly off
17. To remove the brake assembly:
Rotate Brake
Arm CW To
Loosen Band
Motor Shield
4-12
the frame post.
Brake Band
Support Assembly
a) Pull the brake spring and slide the end
off the tub support.
b) Rotate the brake arm clockwise (CW)
to fully expand (loosen) the brake band,
then pull the band assembly, its spring,
and the brake arm off the tub support.
Brake Assembly
Brake Spring