Whirlpool LCE4332PQ User Manual page 19

COMPLETE INSTALLATION
1. Check the electrical requirements on page
2-3, and make sure that you have the
correct electrical supply and the recom-
mended grounding method.
2. Check to be sure that all the parts are now
installed. If there is an extra part, go back
through the steps to see which step was
skipped.
3. Check to be sure you have all of your tools.
4. Dispose or recycle all packaging materi-
als. Keep the expanded foam plug for use
if the washer should be transported.
5. Check to be sure the water faucets are on.
6. Check for leaks around faucets and inlet
hoses.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
7. Plug into a grounded 3 prong outlet.
8. Read the "Washer Use."
9. To test the washer:
a) Measure and add 1/2 the normal rec-
ommended amount of detergent to the
washer.
b) Close the lid.
c) Select any cycle, and then press the
START/OFF keypad.
d) Allow the washer to complete one
whole cycle.
2-9