Turning On The Power And Projecting Images - Epson EMP-730 User Manual

Turning On the Power and Projecting Images

Procedure
1 Check that the Power indicator has
stopped flashing and is lit orange.
2 Turn on the power for all equipment connected to the projector.
For a video source, press the [Play] button at the video source to start
playback if necessary.
3 Press the [Power] button on either
the projector's control panel or the
remote control to turn on the power
for the projector.
The Power indicator flashes green, and
after a short period it stop flashing and
projection starts.
Check that the Power indicator stops
flashing and lights green (it normally
takes about 40 seconds to change).
Tip :
The projector's control panel and remote control buttons cannot be operated while the
Power indicator is flashing green. Wait until it lights steadily.
Depending on the settings, the message "No-Signal." may appear. (p.52)
Lit orange Lit orange
Changes from flashing to lit green
Projector
Remote control
Power
Page down Page up
Computer S-Video/Video Color Mode
Menu A/V Mute Freeze
E-Zoom
Enter
Auto ESC
29