Epson EMP-730 User Manual page 56

Using the Configuration Menu Functions
Sub-menu
Startup Screen
Color Adjustment Adjusts the color temperature
Rear Proj.
Ceiling
Link21L
Reset
54
Sets whether the startup screen is displayed or not.
• To change the user's logo, you need to record and set your own
logo.
for each input source.
• Color Temp.: Lets you adjust bright colors within a range from
reddish tinges to bluish tinges.
If the color temperature is lower, colors appear
reddish and color tones appear softer.
If the color temperature is higher, colors appear
bluish and color tones appear sharper.
Press the [Enter] button and make the adjustment
in the color adjustment sub-menu that appears.
• RGB : Sets the color intensity for each RGB (red/ green/
blue) color in the image.
Press the [Enter] button, select "R" (red), "G"
(green) or "B" (blue) and make the adjustment in
the color adjustment sub-menu that appears.
(This item cannot be selected if "sRGB" has been selected as the
"Color Mode" setting in the "Video" menu.)
Use when projecting images from behind a translucent screen.
When set to "ON", the projected images are horizontally reversed.
Use when installing the projector to a ceiling. When set to "ON",
the projected images are horizontally and vertically reversed.
Sets whether the "EMP Link21L
or not.
After changing the setting, turn off the projector's power. After the
cool-down has finished, turn the power back on. The EMP
Link21L software can then be used.
See "Utility Software" in the Safety Instructions/ World-Wide
Warranty Terms.
Resets all adjustment values for the "Advanced" menu functions
except for the "Language" setting to their default settings.
• Press the [Enter] button to display the confirmation screen, and
select "Yes".
• Select "Reset All" to return all menu settings including settings
for the "Video" and "Audio" menus to their default settings.
(p.56)
Function
and intensity of each RGB color
" utility software is being used
Default
setting
ON
Color Temp.:
Depends on
connection
OFF
OFF
OFF
-