If The Monitor Port Is A 5Bnc Port - Epson EMP-730 User Manual

Connecting to a Computer
If the Monitor Port is a 5BNC
Use the optional computer cable to connect the Computer/ Component Video
port at the rear of the projector to the monitor port of the computer.
See "Appendix: Optional Accessories" (p.84)
Tip :
• Change the "Input Signal" setting in the "Video" menu to "RGB" after making the
connections. (p.49)
• If more than one external component is connected to the projector, use the [Source]
button on the projector's control panel or the [Computer] button on the remote control
to select the Computer port as the input source. (p.30)
• Do not bind the power cord and the computer cable together, otherwise image
interference or errors in operation may result.
18
To monitor port
Computer cable
(optional)
Port
To Computer/
Component Video port