Playing Sound From The Video Equipment - Epson EMP-730 User Manual

Connecting to a Video Source

Playing Sound from the Video Equipment

The projector has a single built-in speaker with a maximum output of 1 W. You
can output sound from the video equipment through the projector's speaker by
connecting the video equipment's audio output port and the Audio-In port
(stereo mini jack) at the rear of the projector using a stereo mini-pin audio cable
(commercially-available). It is recommended that you use an audio cable with a
3.5 mm diameter stereo mini jack.
Use the following procedure to adjust the volume of the sound output.
Procedure
1 Press the [Menu] button on the
remote control, and then select
"Volume" from the "Audio"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.57)
2
Use the [ ] and [ ] buttons to
adjust the volume.
The volume is increased or reduced
each time a button is pressed.
3
After making the adjustment,
press the [Menu] button to exit
the configuration menu.
26
To audio output port
Stereo mini-pin audio cable
(commercially-available)
To Audio-In port
Video Volume : 10 -
Audio Tone : -
0
Setting Reset
Execute
User's Logo
Advanced
About
Reset All
: Return : Select : Adjust
Video Volume : 15
-
Audio Tone :
0 -
Setting Reset
Execute
User's Logo
Advanced
About
Reset All
: Return : Select : Adjust
+
+
+
+