Projecting Images from the Computer
The shape and specifications of the computer's monitor port will determine
what type of cable should be used. Check the following to see which type of
port your computer has.
If the Monitor Port is a Mini D-Sub 15-pin Port
Use the accessory computer cable to connect the Computer/ Component Video
port at the rear of the projector to the monitor port of the computer.
Tip :
• Change the "Input Signal" setting in the "Video" menu to "RGB" after making the
connections. (p.49)
• If more than one external component is connected to the projector, use the [Source]
button on the projector's control panel or the [Computer] button on the remote control
to select the Computer port as the input source. (p.30)
• Do not bind the power cord and the computer cable together, otherwise image
interference or errors in operation may result.
To monitor port
Computer cable
(accessory)
To Computer/
Component Video port
17