Turning the Projector On
Turning the Power On and Projecting Images
TIP
The Password Protect setting may cause the password entry screen to
be displayed each time the power is turned on.
If this happens, enter the password. s
PROCEDURE
Check that the Power indicator has stopped flashing
1
and is lit orange.
Lit orange
Turn the power on for all equipment connected to the
2
projector.
For a video source, press the [Play] button at the video source to
start playback if necessary.
p.31
Press the [Power] button on either the projector's
3
control panel or the remote control to turn the
projector's power on.
A beep will sound to indicate that the projector is starting up.
The Power indicator starts to flash green as the projector warms
up, and an image begins to appear.
Changes from flashing to lit green
TIP
If the Power indicator is flashing green, operation of the [Power]
buttons is disabled.
User's Guide
36
Remote control