Turning On The Power And Projecting Images - Epson EMP-800 User Manual

Turning On the Power and Projecting Images

Procedure
1 Turn on the power for all equipment connected to the projector.
For a video source, press the [Play] button at the video source to start
playback if necessary.
2 Check that the operation indicator
has stopped flashing and lights
orange.
3 If using the remote control, set the
R/C switch on the remote control to
the ON position.
4 Press the [Power] button on either
the remote control or the
projector's control panel to turn on
the power for the projector.
The operation indicator flashes green, and
after a short period projection starts.
Depending on the settings, the message
"No-Signal." may appear. (P.70)
5 Check that the operation indicator
has stopped flashing and lights
green.
Tip :
The projector buttons cannot be operated while the
operation indicator is flashing green. Wait until it
lights steadily.
Operation indicator lights orange
Power
Help
A/V Mute
Computer/YCbCr Video
E-Zoom
Source
Menu Esc
Sync+
Tracking - Tracking +
A to
Projector Remote control
Operation indicator stops
flashing and lights green
Power
Freeze
37