Epson EMP-730 User Manual page 72

When the Indicators Provide No Help
Images appear greenish.
No sound can be heard.
The remote control does not work
Page down
Computer
Menu
Auto
70
• Do the settings for component video
match the signals from the connected device?
If the "Input Signal" command in the "Video" menu is set
to "RGB" when a component video signal source is
connected to the projector, the images will appear greenish.
Select the correct signal format for the connected source.
"Video" - "Input Signal" (p.50)
• Is the audio source connected correctly?
(p.20, 26)
• Has the volume been adjusted to the minimum
setting?
(p.51)
• Is the A/V Mute
The projector may be in A/V Mute mode. Press the [A/V
Mute] button on the remote control to cancel the A/V Mute.
(p.44)
• Is the remote control being pointed in the right
direction?
The operating angle for the remote control is
approximately 30º horizontally and approximately 15º
vertically.
Power
Page up
S-Video/Video Color Mode
• Is the remote control too far from the projector?
A/V Mute Freeze
The operating distance for the remote control is
E-Zoom
approximately 6 m (20 ft.). (p.13)
Enter
• Is direct sunlight or strong light from fluorescent
ESC
lamps shining onto the remote control light-receiving
area?
• Has the battery insulating tape been removed?
(p.12)
• Is there battery in the remote control?
(p.76)
• Is the battery dead?
• Has the battery been inserted correctly?
(p.76)
setting turned on?
input signals