Table of Contents
Advertisement
Setup steps:
1.
Log in IP camera via crossover cable direct connection.(For details, please refer to
Hardware Installation)
2.
Set PPPoE parameters.(for details, please refer to PPPOE settings)
3.
Connect IP camera to Internet.
4.
If DDNS service is successfully set for the device, the device can be visited via
entering domain name into IE browser.
See below picture for PPPoE settings:
FAQs
1.
No video image displayed in IE browser.
Possible reason: ActiveX not installed
Solution: ActiveX must be installed when visiting IP camera for the first time via
Internet Explore.
How to install: Visit IP camera, click Download Address, file download dialog
will pop up, select Run or Save to download. After download finishes, installation
interface will pop up, click install, the installation of ActiveX will start automatically,
"Register OCX success" dialog box will pop up to remind the completion of
installation process.
2.
Fail to visit IP camera via IE after upgrade.
Honeywell
55
Hide quick links:
Advertisement
Table of Contents
