Honeywell HISD-1181W Operation Manual page 23

•
Enable Mask: Enable or disable video masking.
•
Mask area set: Click and move cursor to set image masking area, an image can
be entirely or partially masked, maximum 4 areas supported.
•
All: Mask the whole image.
•
Cls: Clear masked areas.
After you set these parameters, please click Save to make them valid.
Picture Parameter
See Figure 3-20, 3-21 for the interface of "Snap picture parameter setting":
Figure 3-19
Figure 3-20
HISD-1181W)
Honeywell
17