Honeywell HISD-1181W Operation Manual page 5

CAUTION
•
Non-technician should not try to operate this dome device before reading this
manual carefully.
•
Cut the power supply off before operating the dome device to avoid damage
caused by mal-operation.
•
Interior of the dome device are precision optical and electrical instruments. Heavy
pressure, shock and other incorrect operations should be prevented. Otherwise,
may cause damage to product.
•
All the wiring of the dome device should be conducted strictly according to the
wiring instruction. When necessary, thunder-proof, surge-proof and other
protecting measures should be carried out.
•
Please do not use the product under circumstances where the limits exceed the
maximum specified temperature, humidity or power supply specifications.
•
Contents in this manual may be different from the edition that you are using.
Should any unsolved problem occur given that the product is used according to
this manual, please contact our technical support department or your product
suppliers.
•
The default communication protocol for this dome device is PELCO-D, and baud
rate is 2400 BIT/s, dome address is No.1.
Honeywell
iii