Ptz Setting - Honeywell HISD-1181W Operation Manual

•
WDR Control: If you turn on WDR, you can't set BLC Control.
Wide dynamic range: WDR is intended to provide clear images even under back
light circumstances where intensity of illumination can vary excessively, namely
when there are both very bright and very dark areas simultaneously in the field of
view of the camera. WDR enables the capture and display of both bright and dark
areas in the same frame, in a way that there are details in both areas, i.e. bright
areas are not saturated, and dark areas are not too dark.
•
BLC Control: To get better image effect, you can select BLC.
Back light compensation: When there is strong light behind the monitored objects,
illumination compensation will be provided in the required range to get better
image quality.
•
Mirror Control: Set mirror, horizontally rotate the video.
•
Manual IRcf Control/Auto IRcf Control: Set the picture displayed color or black
and white.
•
IR Light: You can choose normal light, 850nm light or 950nm light.
•
Program AE mode: Under this option, user can make setting of AE, Shutter
Priority, Exposure Priority, etc.
In program AE mode, R stands for D/N automatically,1stands for high sensitivity, 2
stands for middle sensitivity, 3 stands for low sensitivity, + stands for automatic
digital shutter. See Figure 40 for detailed AE selections.
Shutter Priority: You can obtain the value of aperture when shutter is defined
manually control. It is used to shoot moving objects.
Exposure Priority: Set the value of aperture manually and can obtain the shutter
speed.
•
Maximum AGC gain: User can make AGC value manually from 0 to 255.
•
Environment Power Frequency: User can choose power frequency of 60Hz or
50Hz accordingly.
•
Under Point Low Lighting Sources Auto Zooming: User can make choice of
Low lighting AF, Default AF or Under point low lighting sources zooming
accordingly.
After setting all the parameters, click Save to make the parameters valid.

PTZ Setting

See Figure 3-42 for the interface of "PTZ Setting".
If you choose the mode that with R in Program AE mode, you
can't set Manual IRcf Control.
Honeywell
37