Honeywell HISD-1181W Operation Manual page 44

Operating Guide for IP Camera
•
Auto Flip: Enable or disable auto flip .when the video rotated vertically, if you
disable this function, dome camera won't continue when it moved to the maximum
angle; If you enable this function, when the dome camera rotated vertically to the
maximum angle, it will be rotated horizontally 1800, after that, it will continue to
rotated vertically.
•
Proportional Pan: Enable or disable proportional pan. If the function is disabled,
you can drag the speed change lever to change the PTZ speed; If you enable the
function, the speed of PTZ will be changed according to the proportional, the
bigger proportional, the lower speed of PTZ.
•
Set Azimuth Zero: If you set azimuth zero, the device will be rotated to thereafter
power on and tests by itself when click this button. If you delete the azimuth zero,
it will be rotated to the machine zero.
•
Manual Limit set: Enable or disable the manual limit set. The dome can be only
rotated in the range as you set if enable this function.
•
Scan Limit set: Enable or disable the scan limit set. If you enable this function,
the dome can be only rotated in the range as you set when it is scanning.
•
Scan Speed Set: Pan Scan Speed:1-40°/s; Tilt Scan Speed:1-20°/s.
•
Park: Park Mode: You can set what you want the dome to do when it is in park
mode.
Park Time: 2-60min.If you set it as 3min,it means when there is no task for dome,
after 3min it will start park mode.
38
Figure 3-42