Operating Guide for IP Camera
IP EMail
See Figure 3-31 for the interface of "Public IP noticed by email":
•
Enable Email: Check this switch to enable public IP mail notification function.
•
Update Interval: Select the interval of public IP mail notifications.
After enable this function, when the device starts or detects public IP change, it will send
notification mail to the mail address set in mail setting.
After you set these parameters, please click Save to make them valid.
Connecting
See Figure 3-32 for the interface of "Connect setting":
•
Auto connect: Enable or disable active connection of the device to surveillance
center.
•
Center URL: The address of surveillance center (e.g. 192.168.55.4).
•
Center port No.: The port of surveillance center (e.g. 6000).
After setting all the network parameters, click Save to make the parameters valid.
Storage Settings
Device Setting
See Figure 3-33 for the interface of "Device Setting":
26
Figure 3-31
Figure 3-32