Table of Contents
Advertisement
Ex
3 Setting the PTZ Camera over the LAN
Notes:
You shall acknowledge that the use of the product with Internet access might be
under network security risks. For avoidance of any network attacks and information
leakage, strengthen your own protection. If the product does not work properly,
contact with your dealer or the nearest service center.
To ensure the network security of the PTZ Camera, we recommend you to have the
PTZ Camera assessed and maintained termly. You can contact us if you need such
service.
3.1 Wiring
To view and configure the network PTZ Camera via LAN (Local Area Network), you need
to connect the PTZ Camera in the same subnet with your PC. Then, install the SADP or
client software to search and change the IP address of network PTZ Camera.
Connect the PTZ Camera to network according to the following figures.
Network Positioning System
Network Cable
Power Cord
Positioning System
3.2 Activating the PTZ Camera
Purpose:
You are required to activate the PTZ Camera first by setting a strong password for it
before you can use the PTZ Camera.
Explosion-proof PTZ Camera·Quick Start Guide
Network Cable
Figure 3-1 Connecting Directly
Network
Cable
Junction Box
Figure 3-2 Wiring over LAN
Internet
Switch
6
Computer
PC
NVR
Advertisement
Table of Contents
