Table of Contents
Advertisement
REMOVING
VALVE TRAY
1) Unplug or disconnect the power source to
the stove.
2) Shut off the gas supply and remove the gas
connection from the valve.
3) Remove the top louvre.
4) Remove the safety screen.
5) Remove the screen door.
6) Remove the logs.
7) Remove the brick panels.
8) Remove the rear log tray.
9) Remove the grate.
10) Remove the burner.
11) Remove the glass door holder by removing 4
screws on the front and 2 on the bottom.
Glass Door
Holder
12) Remove the firebox base plate by removing
11 screws which hold it in place.
Regency IG35 Gas Inbuilt Fireplace
13) Remove the valve cover plate by removing
the 3 screws.
Valve Cover
14) Remove all the wire connectors from the
valve and spark ignitor.
15) Remove the 2 screws which secure the
valve tray. Use a long Philips screwdriver
for easy access.
MAINTENANCE
16) Remove the valve tray assembly.
17) To replace the valve tray assembly, simply
reverse the above steps.
27
Advertisement
Table of Contents
