Table of Contents
Advertisement
INSTALLATION
25) Secure all loose wires in the wire clip to the right side of the valve.
See diagram 23.
Diagram 23
Louver Installation:
26) Secure the hinge bracket and hinge to the outside of the fi rebox fl ange
on the left and right side as shown using 2 screws on each side. See
diagram 24.
Hinge Bracket
Diagram 24
27) Align the bottom louver hinge tab screw holes with hinge screw holes
and secure using 3 screws on each side. See diagram 25.
Bottom Louver
Diagram 25
20
918-644b
Screen Door Installation:
28) Re-install the glass door.
29) Install the screen by placing the hooks (2 on each side) into the slots
30) Close the bottom louver.
Hinge
31) Plug in the power source.
5
on the inside of the faceplate. Once in place, push down on the screen
to secure. See diagram 26.
Diagram 26
NOTE:
The fan should run at least on low speed to prevent the unit
from overheating which will cause automatic shutdown via the
thermodisc safety switch.
IG35
Regency IG35 Gas Inbuilt Fireplace
06/23/08
Advertisement
Table of Contents
